How to Request Video on Tactacam Reveal X 2.0
Request video on a Tactacam Reveal X 2.0 by switching the camera's capture mode to Video in the REVEAL app and saving the change. The camera records a clip on the next motion trigger, then sends you a notification you tap to download it.
On this page (8 sections)
- How do you request video on a Tactacam Reveal X 2.0?
- Where is the video setting in the REVEAL app?
- How long does a video request take to arrive?
- Why does a video request fail or return a photo instead?
- How do you download and save a requested clip?
- How do you keep video requests from draining your plan?
- What should you check before relying on video mode?
- How do you request video on a Tactacam Reveal X 2.0 when the app won't cooperate?
Request video on a Tactacam Reveal X 2.0 by switching the camera's capture mode to Video in the REVEAL app and saving the change. The camera records a clip on the next motion trigger, then sends you a notification you tap to download it.
There is no button in the app that asks the camera for a clip on demand. Video on a Reveal camera is trigger-driven: you set the mode, the camera waits for movement, and the clip arrives when the animal walks through.
This guide covers the exact steps, how long the clip takes to land, and how to keep video from draining your data plan.
How do you request video on a Tactacam Reveal X 2.0?
Set the capture mode to Video in the REVEAL app, save it, and let the next motion trigger do the recording. The request is really a settings change, and the camera answers it the moment something moves in front of the lens.
The steps look like this:
- Open the REVEAL app and select your Reveal X 2.0 from the camera list.
- Open the camera's settings panel and find the capture or photo/video mode option.
- Switch it from Photo to Video and save.
- Sync the camera so it picks up the new setting.
- Wait for a motion event, then open the notification and download the clip.
Do the switch at a time you can watch the app. If you change the mode and walk away for a week, you'll get a batch of video requests you weren't expecting.
For general setup help on the newer model, see our Tactacam Reveal Pro 3.0 review for how the app menus are laid out across the Reveal line.
One detail worth knowing before you start: the camera records on its own trigger, not on your tap. The app controls how the camera behaves from then on, not what it captures right now.
Plan the switch around the movement you expect, not around the moment you feel like watching video.
Where is the video setting in the REVEAL app?
The video setting sits in the camera's settings screen, under the capture mode option. Open the app, tap the camera you want to change, then tap through to its settings.
Capture mode is usually near the top of the list, next to photo resolution and trigger settings.
Look for a toggle or a dropdown that reads Photo or Video. Some app versions label it "Capture Mode" and others split it into "Photo" and "Video" buttons.
Either way, selecting Video and saving sends the request to the camera over the cellular link.
The capture mode is separate from the trigger settings, so changing one does not move the other. The trigger decides when the camera fires, and the capture mode decides what it saves when it does.
On the Reveal line the trigger stays fast, so a video clip can start before a moving animal clears the frame.
The app confirms when the change reaches the camera. If the status shows pending, the camera may be asleep or out of signal.
Wake it with a sync request from the app and try again.
How long does a video request take to arrive?
Allow a few minutes for the mode change to reach the camera, then wait for the next motion trigger. The clip itself follows once the trigger fires and the camera finishes uploading.
Timing depends on three things:
- Signal strength at the camera. A weak LTE connection slows the upload.
- Clip length. A longer video takes more time to push over the cellular network.
- Your plan's upload priority. Some plans throttle large files during peak hours.
If you've waited a full day with no clip, the camera may not have caught the setting change. Reopen the app, confirm Video is saved, and sync once more.
Also check that the camera still has battery power; a drained pack stops uploads dead.
The newer Reveal models help here because they lock onto whichever carrier has the stronger signal at the camera's exact spot. That cuts down on the weak-signal delays that make a video request feel like it vanished.
Why does a video request fail or return a photo instead?
The most common cause is that the camera stayed in Photo mode because the change never synced. A request only works when the camera itself knows about it.
The app can show Video selected while the camera still holds the old setting.
Check these in order:
- Confirm the app shows Video as saved, not pending.
- Force a sync from the app and watch for a confirmation.
- Check the camera's battery level and signal indicator.
- Make sure your data plan is active and not maxed out.
If the plan has run out of data, the camera keeps taking photos but can't send video. That's a plan problem, not a camera problem.
Our guide to cellular trail camera plans and carriers explains how data tiers work and what to expect when a plan runs dry.
A photo arriving right after you switched modes is the clearest sign the setting is still stuck. The camera took the shot it knew how to take.
Re-sync before you blame the camera or the app.
How do you download and save a requested clip?
Open the notification, tap the video, and let it download fully before you close the app. A partial download usually means the connection dropped mid-transfer.
Once the clip is on your phone, save it to your camera roll or a cloud folder so it doesn't vanish when the app clears its cache. Label it with the date and camera location while the details are fresh.
If you plan to share it, trim the clip first; long videos are harder to send and use more data to re-upload.
Built-in storage on newer Reveal models sends footage straight to your phone without a separate SD card. The X 2.0 works through the same app flow, so the download steps match.

The newer X 3.0 in the same Reveal family, with 1080p video and app transfers straight to your phone.
See it on AmazonHow do you keep video requests from draining your plan?
Use video in short bursts rather than all season. Video clips are far heavier than photos, so a camera running video 24/7 burns through a data plan in weeks.
A practical routine:
- Run Photo mode as your default, then switch to Video for a week or two around the rut or when you suspect a specific buck is working an area.
- Pick shorter clip lengths when you only need to confirm what walked by.
- Download clips over Wi-Fi when you get home instead of pulling them over LTE in the field.
If you're weighing whether the data cost is worth it, our piece on whether cellular trail cameras are worth it walks through the trade-offs. And if you're comparing camera lines before committing, the Moultrie Edge 2 is another option worth a look.
A short burst of video around a scrape or a fence gap tells you more than weeks of clips on an empty trail. You get the behavior you wanted and you keep your plan intact for the rest of the season.
What should you check before relying on video mode?
Confirm the mode saved, the battery is charged, and the plan has data left. These three checks prevent most failed requests before they happen.
Does the camera need a specific plan for video?
Video needs an active data plan, and the bigger the clip, the more data it uses. Check your plan's monthly allowance before you switch to video for a long stretch.
A plan that handles photos comfortably may not stretch to daily video uploads.
How do you mount the camera for clean video?
Video benefits from a steady mount. A camera that shifts in the wind ruins a clip with a wobbling frame.
The 360-degree tree mount lets you aim the lens precisely and lock it down, so the video frame stays centered on the trail.

A rotating tree mount that holds the camera steady and lets you aim the video frame exactly where the trail crosses.
See it on AmazonHow do you protect the camera while it records video?
A camera left in the field runs unattended for months. A steel security box keeps it in place and protects it from animal damage.
The Tactacam box is built for the Reveal line, so it fits without blocking the lens or the antenna.

A steel lock box made for Reveal cameras, so the camera stays put and the lens stays clear while it records.
See it on AmazonDo you need an SD card for video?
Not on the newer Reveal models. Built-in storage sends footage straight to your phone, so there's no separate card to buy or format.
That also means one less thing to fail in the field when a clip is uploading.
How do you request video on a Tactacam Reveal X 2.0 when the app won't cooperate?
Close the app, reopen it, and sync the camera again. Most app hiccups clear with a fresh connection.
If the mode still won't stick, check that the camera's firmware is current and that your phone has a stable connection to the REVEAL servers.
Then confirm the request actually landed. A saved mode plus a motion trigger is the whole process.
There's no hidden request button to find; if you've done those two things and still get photos, the setting didn't sync. Repeating the request video steps on a Tactacam Reveal X 2.0 usually fixes it.
For anyone still deciding on a camera, start with our cellular trail camera buying guide. The Reveal X 2.0 handles video requests through the same app flow as the rest of the Reveal family, so what you learn here carries over.
Frequently asked questions
Can you request video on demand from a Reveal camera?
No. The camera captures video when motion triggers it, not when you tap a button in the app.
You set the capture mode ahead of time and download the clip after the trigger fires.
How long are video clips on a Reveal camera?
Clip length depends on the video setting you pick in the REVEAL app. Shorter clips download faster and use less data, while longer clips capture more of the animal's behavior.
Does video use more data than photos?
Yes. A video clip carries far more data than a single photo, so heavy video use eats into your monthly plan faster.
Many owners run photos most of the year and switch to video for short stretches.
Why did my camera send a photo instead of a video?
The camera was probably still set to Photo mode, or the mode change hadn't reached it yet. Reopen the app, confirm Video is selected and saved, then sync the camera so the new setting takes effect.
Can I get video without a cellular plan?
No. The Reveal X 2.0 needs an active data plan to send clips to your phone.
Without one, the camera records to storage but can't push video over the air to the app.
About this guide: Our look at requesting video clips on a Tactacam Reveal X 2.0 draws on maker specs, materials and what owners report. See how we research.



